Skip to main content
FREE Delivery!|(812) 721-8126

Greene County, Indiana ยท Free Delivery

Large River Rock, Stone and Soil Delivery in Linton, IN

Free delivery to Linton on every order, with loads arriving in as fast as 2 business days.

Delivering to Linton, IN

Free delivery on every order.

  • Free delivery to Linton
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Linton

Crushed gravel and base materials that compact under tires.

#53 Stone

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Linton

Rock & Stone delivered to Linton

Graded crushed stone for drainage, concrete and heavy work.

#8 Stone

3/32" to 3/8" clean stone for drainage and concrete mixes

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Linton

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Linton

Decorative delivered to Linton

Rounded stone for beds, borders and water features.

Sand delivered to Linton

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Linton

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Linton works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Linton.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Linton addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Indiana Rock Supply handles gravel and aggregate delivery in Linton, IN. Start with #53 stone, the dense graded base this market builds on. It packs hard under drives, pads and shed floors. Around here the ground is thick wind-blown silt over clay, and bare banks wash fast when water runs.

We also stock the coarse stone that holds slopes, swales and creek banks in place. Each size has its own job, and delivery comes by dump truck on the date you pick at checkout.

Materials for Linton Projects

Erosion control starts with stone big enough to stay put. On the low valley ground beside the Wabash and White rivers, banks and ditch lines cut fast during high water. Coarse, angular stone locks together and slows that water down.

Rip rap is the first choice for stream banks, ditch banks and culvert outlets. It is graded locally as revetment, Class 1 and Class 2 riprap. Bigger stone holds a slope, and smaller stone fills the gaps between it.

For swales and wet flat spots, drain rock runs water to a low point instead of letting it pond. Railroad ballast works the same way on hard standing and severe drainage, where the flow is heavy.

For a tight, walkable surface, #73 stone packs smooth over a compacted #53 base. Driveway stone tops an existing drive the same way. Both are dense graded, so they bind rather than stay loose.

From coarsest to finest, the sizes break down like this:

For decorative work, river rock and large river rock build dry creek beds that move water and still look tidy. Natural Pea Gravel suits walkways and play areas. For planting, screened topsoil and garden soil rebuild ground that has been stripped or graded.

Ground and Conditions in Linton

Winter and spring are the high-water months on the river bottoms. Low sites are slow to drain and can flood when the Wabash, White and Patoka rivers run high. If your site sits low, plan the build for late spring through fall, once the water drops and the silt dries.

Upland ground has its own problem. Many loess soils carry a fragipan, a tight layer that holds water near the surface in wet seasons. A driveway or pad over that layer needs a drainage layer under it, not just more fill.

Winters here are milder than in northern Indiana, but repeated freeze-thaw still heaves gravel drives and softens wet, silty subgrades. Frost depth is shallower than up north, and the exact footing depth is set by the county or city building department. Do not assume a northern figure.

On slopes, strip the cover only when you are ready to place stone. Bare loess washes away quickly once its cover is gone. In places, old underground coal mines can also cause the ground to settle, so watch for soft spots before you compact.

Delivery to Linton and the Surrounding Area

Indiana Rock Supply delivers bulk material across Linton and the rest of Greene County. That includes Bloomfield, Jasonville, Worthington, Lyons and Switz City. Order online and pick your material by the ton or the yard.

Estimate your quantity before you order. A driveway base needs enough depth to compact, and a thin, even layer is a good starting point for a topping layer. For a base, plan deeper so the stone can lock together under load.

Bulk delivery means a dump truck backs to your site and spreads the load where you want it. Clear the path first. Mark any sprinkler heads, low wires or soft ground the truck should avoid. Lead time varies with the season and the material, so order ahead when your site is ready.

Order Stone and Soil for Your Linton Project

Indiana Rock Supply delivers bulk gravel, stone, sand and soil across Linton and the surrounding Greene County area. Whether you are armoring a creek bank, topping a drive or rebuilding a lawn, we can get the right material to your site. Order online when your ground is ready.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Linton, IN

What stone should I use for drainage in Linton?

Use clean, single-size stone that lets water pass, such as #57 stone, #8 stone or drain rock. For a French drain or foundation drain, line the trench, set the pipe on clean stone and backfill with more of it. For a swale or a wet flat spot, drain rock moves water to a low point. Coarse rip rap suits ditch banks and culvert outlets where flow is heavy.

What should I have ready when the truck arrives?

Have the delivery spot clear and reachable. Move vehicles, trailers and anything else out of the path. Mark sprinkler heads, low wires and soft ground the driver should avoid. Know where you want the load dropped, and have someone on site to direct it. If the ground is wet and silty, tell us ahead so we can plan the approach.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.