Order Gravel, Stone and Soil in Palmyra, IN

Indiana Rock Supply handles gravel and aggregate delivery in Palmyra, IN, and the material most jobs here start with is #53 stone. It is the dense graded base Indiana crews call for under drives, pads and slabs. This is hill country, so a lot of work begins with raising grade before any stone goes down.

Fill dirt brings a low spot up to level. Then #53 stone packs hard on top and carries the load.

Materials for Palmyra Projects

Most projects in Palmyra start below the surface. A building pad, a shed base or a driveway on sloping ground needs fill first, then a compacted base over it. Order the fill and the base together and you build the pad once.

For raising grade, Fill Dirt is the starting material. It fills low spots and backfills before any stone goes down. Spread it in lifts and compact each one, because loose fill settles and takes your base with it.

Over that fill, #53 Stone is the standard base. It is a dense graded stone with fines that packs hard under driveways, parking pads and shed bases. #73 Stone is the finer dense graded size, for topping and resurfacing where you want a tighter surface.

For a finished drive, Driveway Gravel goes over a compacted base. For drainage under a pad or along a footing, Drain Rock gives water somewhere to go.

Ground and Conditions in Palmyra

Palmyra sits in the south-central hills and karst country. The ground is mostly unglaciated: thin, silty soils over sandstone and shale on the ridges, and red-brown clay over limestone on the karst plain.

That matters for base depth. Silty ridgetop soils often hold a dense layer that traps water near the surface, so an under-built base pumps and fails in a wet spring. On the karst plain, water drains into sinkholes. Runoff aimed at one can wash out fill or open a collapse, so keep fill and drainage away from them.

Bare slopes gully fast, and water funneled into a sinkhole carries soil underground. Build the pad up, crown it, and send water to a daylight outlet instead. Base and driveway work runs best from late spring through fall. In wet winter and spring weather, clay turns slick and unpaved drives rut.

Winters here are milder than up north but still bring repeated freeze-thaw. That heaves gravel drives and softens clay subgrades. Frost depth is shallower than in northern Indiana, and the exact footing depth is set by the county or city building department. Do not assume a northern figure.

Delivery to Palmyra and the Surrounding Area

Order online and pick your quantity by the ton or the yard. Measure the area, decide the depth, and the tonnage follows. If you are unsure, size the order to the lift you are placing rather than the whole job.

Bulk delivery drops on site, so leave room for the truck to reach the pad or drive. Palmyra sits in Harrison County, and we also deliver to Corydon, Lanesville, New Salisbury, Crandall and Elizabeth.

Steep ground changes how a load comes off the truck. Tell us where the fill is going and whether the drop is on a slope, and we can place it where you need it.

Questions About Base and Fill in Palmyra

What is the best base under pavers in Palmyra?

#53 stone is the standard base under pavers here. It is dense graded with fines, so it compacts hard and stays put. Place it in lifts and compact each one. For the bedding layer directly under the pavers, use Stone Screenings to level and set them.

Do you supply contractors working in Palmyra?

Yes. Contractors, builders and homeowners all order the same way, by the ton or the yard, delivered in bulk. Measure the pad or drive and the depth you are building to, then use the calculator to size the fill and base quantities for the job.

Order #53 Stone and Fill for Your Palmyra Job

#53 stone is the base most Palmyra work is built on, and fill dirt is what gets the grade there first. Indiana Rock Supply delivers both in bulk, along with drainage stone, sand and topsoil. Order online by the ton or the yard and we will bring it to your site.