Bulk Gravel Delivery to Kentland, IN

Indiana Rock Supply stocks gravel and aggregate delivery in Kentland, IN, from #53 stone to mason sand and rip rap. The local ground is dense glacial till, so the material under your project matters as much as the material on top of it.

Order online and we deliver bulk loads to your driveway, patio site or job site in Newton County.

Materials for Kentland Projects

Patios and flatwork in Kentland stay level only on the right bedding. Limestone screenings, also called stone screenings, are the standard bed under pavers, flagstone and walkway units. They compact to a tight, level plane you can set stone on without it rocking later. Order Stone Screenings for the bedding layer.

Under that bedding, the base has to carry the load. #53 stone is the standard Indiana base: a dense graded crushed limestone with fines that packs hard and is specified as compacted aggregate No. 53. Buy #53 Stone for the base under patios, slabs and paver fields.

Wet ground changes the plan. Where water sits after spring rain, put a clean stone drainage layer under the base before you compact anything.

For joints and tight bedding, #89 stone fills the gaps between pavers and sets a firm edge. Order #89 Crushed Stone for joints and tight bedding. Mason sand, also called mortar sand, covers brick and block work, paver joints and play sand.

Driveways and paths take different stone. Driveway stone, which most Indiana suppliers call driveway gravel, surfaces an existing drive or tops a compacted #53 base. Walkway gravel gives paths a finer, walkable surface. For decorative beds, borders and dry creek beds, river rock and large river rock do the work.

Ground and Conditions in Kentland

A thin base is the failure you see first here. Set pavers on too little #53 stone and the slab flexes, the joints open, and the surface ruts within a season or two.

Kentland sits on a flat to gently rolling plain of dense glacial till. That is loamy clay that drains slowly, and late winter and spring rain has nowhere easy to go.

So spreading more surface stone will not help; the base needs thickness and the water needs an exit. Compact the #53 base in lifts to a proper depth, then add a clean drainage layer where water stands.

Cold winters bring repeated freeze-thaw, which heaves and ruts gravel drives on wet clay and softens the subgrade every spring. Local building requirements set footing depth; the local building department holds the figure.

Timing matters too. Base and driveway work runs best from late spring, once saturated clay dries out, through fall. Frozen ground stops compaction through the winter months, so plan patio and driveway work for the dry months.

Delivery to Kentland and the Surrounding Area

Order online and pick your material, then decide on quantity. Bulk aggregate sells by the ton or by the cubic yard, and the two are not the same thing. A yard measures volume; a ton measures weight, and stone weighs far more per yard than topsoil.

To estimate, measure the area and the depth you want, then convert to cubic yards. For a patio base, depth is the number that decides the load size, so get it right before you order.

We deliver bulk loads to Kentland and to the rest of Newton County, including Morocco, Goodland, Brook, Lake Village and Thayer. Have the drop spot clear and accessible so the load lands where you need it.

Questions Kentland Buyers Ask

What gravel is best for a driveway in Kentland?

Start with #53 stone for the base. It is the standard Indiana base, a dense graded crushed limestone with fines that compacts hard over clay. Top it with #8 stone or driveway stone for a cleaner surface. Where the drive stays wet, add a clean drainage layer such as #57 stone before you compact the base.

How much material will my project need?

Measure the area and the depth, then convert to cubic yards. Base depth does most of the work: a patio or driveway base needs more than a thin skim, especially on clay. Order by the ton or the yard once you have the volume. The calculator on the product page turns your measurements into a quantity.

Ready to Order Aggregate for Your Kentland Project

Figure your square footage and depth, run the numbers through the calculator, and order the #53 stone, screenings and drainage stone your project needs. Indiana Rock Supply delivers bulk aggregate across Kentland and Newton County, so you can get the base right the first time.