Bulk Aggregates for Pathways in Jasper, IN

Indiana Rock Supply handles gravel and aggregate delivery in Jasper, IN, and the materials we stock most are the ones local crews ask for by name. That starts with #53 stone, the dense graded base Indiana specifies as compacted aggregate No. 53, and runs through washed stone, sand, topsoil and decorative rock.

This part of Dubois County sits on thick wind-blown silt over flat valley ground, so what you put under a path matters as much as what you spread on top.

Materials for Jasper Projects

Paths and walkways are where the fines do the work. A walkable surface needs a material that packs tight instead of rolling underfoot, and that usually means starting with a compacted base and finishing with something finer. Here is what we stock for that job and for the drives, pads and beds around it.

For the base under a path, patio or paver walk, start with #53 stone. It is dense graded with fines, so it locks together when you compact it and stops the surface above from shifting. Build it up as a solid base and compact it in lifts.

For the walking surface itself, walkway gravel gives you a finer, smoother material that stays firm under a wheelbarrow and does not chew up shoes. Spread it in a thin, even layer over the compacted base and rake it level.

If you are resurfacing an existing drive or topping off a base that is already sound, #73 stone is the finer dense graded size. It has a smaller top size than #53, so it packs into a tight, smooth surface with fewer loose stones.

Under flagstone and pavers, use stone screenings for bedding and leveling. Screenings let you set each piece to grade and stay there, which is the difference between a path that sits flat for years and one that rocks every time you step on it.

For drainage beside a path or at the low end of a walk, drain rock moves water instead of holding it. Pair it with #57 stone where you need a clean, open-graded fill that will not clog.

Ground and Conditions in Jasper

The failure mode here is a thin base. Put a thin skim of stone over silt and clay and it disappears into the subgrade the first wet spring, leaving ruts and a surface that pumps when you walk on it. That is the ground you are working with across the flat valley bottoms and old lake-bed flats.

The fix is depth and separation. Excavate enough to fit a solid compacted layer of #53 stone under the surface layer, and more where the ground stays soft. On low sites, add a drainage layer of clean stone so water has somewhere to go instead of sitting in the base.

Winters here are milder than up north, but repeated freeze-thaw still heaves gravel drives and softens wet, silty subgrades. Footing depth is set by the county or city building department, so check locally rather than assuming a northern figure.

Timing matters on the river bottoms. Winter and spring are the high-water months, so low sites build best from late spring through fall once water drops and the silt dries out. Bare loess also washes fast once its cover is stripped, so seed or cover exposed ground promptly.

Delivery to Jasper and the Surrounding Area

Ordering online is easiest when you know whether you are buying by the ton or by the cubic yard. Stone and sand are usually sold by weight, while topsoil, fill dirt and mulch are often easier to think about by volume. The two are not the same number, so pick one and stay with it.

To estimate, measure the length and width of the area, decide your depth in inches, and let the calculator convert that into tons or yards. Add a little for settling and spillage. If you are unsure, describe the job and we will help you land on a quantity.

Bulk delivery covers Jasper and the rest of Dubois County, including Huntingburg, Ferdinand, Holland, Dubois and Birdseye. Have the site clear and reachable so the truck can place the load where you want it, not where it has to dump.

Questions Jasper Buyers Ask

What should I have ready when the truck arrives?

Clear the driveway or pad so the truck has a straight approach and room to turn around. Mark any sprinkler heads, shallow lines or soft spots that should not take weight. Decide in advance where you want the pile dropped, because once the bed is raised, that spot is where the material lands. If a fence, low wire or tree limb crosses the route, mention it when you order so the right truck is sent.

What is the best base under pavers in Jasper?

Compacted #53 stone is the standard base here. It is dense graded with fines, so it packs hard and spreads the load instead of letting pavers settle unevenly. Excavate deep enough for a solid base, compact in lifts, then bed the pavers on stone screenings for leveling. On soft valley ground, go deeper and add drainage stone at the low edge so water does not sit in the base.

Get Your Jasper Path Project Started

Figure your square footage and depth, run it through the calculator, and you will have a tonnage or yardage you can order with confidence. From a short garden path to a full paver walk, Indiana Rock Supply delivers the base, bedding and surface material to Jasper and across Dubois County. Build your order online when you are ready.