Skip to main content
FREE Delivery!|(812) 721-8126
Gravel, Stone and Soil for Jackson County, IN

Gravel, Stone and Soil for Jackson County, IN

What do you order for a driveway, a drainage run or a garden bed in Jackson County? For gravel, stone and aggregate delivery in Jackson County, IN, Indiana Rock Supply supplies bulk material by the ton, and the answer usually starts with #53 stone. It is the dense graded base that packs hard under drives, pads and slabs. 53.

From there the choice follows your ground. Much of the county sits on silty, slow-draining soils with a dense fragipan, so water perches near the surface and base depth matters more than it does on well-drained ground.

Materials Delivered in Jackson County

Order by size, from the coarsest stone down to the finest sand and soil. Coarse sizes drain and hold heavy loads, while dense graded sizes with fines lock together and carry a surface.

#53 stone carries most of the base work here. Contractors order it for driveways, parking pads and shed bases, and for the layer under pavers and slabs. It is a dense graded stone with fines, so it compacts into a hard, stable surface instead of staying loose.

Above that base, most buyers finish with Driveway Gravel or a clean size like #8 Stone. For drainage, Drain Rock and #57 Stone handle French drains, foundation drains and downspout runs.

Sand and soil round out the list. Washed Sand beds and levels under slabs, Mason Sand goes into brick and block work and paver joints, and Garden Soil fills raised beds. Shredded Mulch holds moisture in beds and tree rings through hot, humid summers.

Ground Conditions Across Jackson County

Start with timing. Flat fragipan ground and valley lowlands stay wet through winter and spring, so base work runs best from late spring through fall. Low ground along the Ohio River can flood in the wet season.

That timing shapes how you build. On slow-draining flats, water perches above the fragipan, so a compacted #53 base needs to sit on ground that has been shaped to shed water, not on a low spot that holds it. Where water has nowhere to go, a clean drainage stone like drain rock or #57 stone gives it a path.

Hills behave differently. Steep hillsides shed runoff fast into narrow valleys, and bare cuts wash out quickly. On those slopes, rip rap protects ditch banks, culvert outlets and stream banks, and matting or stone at the outlet keeps water from cutting a channel.

Winters here are milder than in northern Indiana but still bring repeated freeze-thaw that heaves gravel drives and softens clay subgrades. Frost depth is shallower than in northern Indiana, and the exact footing depth is set by the county or city building department, so do not assume a northern figure.

Delivery Across Jackson County

Indiana Rock Supply delivers bulk material across the county, including Seymour, Brownstown, Crothersville, Medora, Vallonia, Freetown and Norman. You order online and the load arrives by the ton, so you size the order to the job rather than to a bag count.

To size a load, work out the area and the depth you want, then convert to tons using the material's weight. A driveway base is usually figured at a minimum depth of a few inches compacted, and a top dressing goes on thinner. If you are unsure, describe the job and the crew can help you match the tonnage to the area.

Bulk delivery means the truck needs a place to dump. A clear, firm approach and a spot near the work keep the drop quick, and spreading straight from the pile saves handling. Give a little thought to where the pile lands before the truck arrives.

Choosing the Right Material

Ground next door is not the same as ground here, and the right order shifts with it. Monroe County and Lawrence County both sit in South Central Indiana on the same south-central hills and karst country as parts of Jackson County, so the ground is similar. There, thin silty soils on steep ridges and red-brown clay over limestone on the karst plain call for the same dense graded base and clean drainage stone you would use on Jackson County hill ground.

Bartholomew County is different. It sits on the central and northeast till plain, a flat to gently rolling plain of dense glacial till with loamy clay and sand and gravel outwash along the larger river valleys. That flatter, heavier clay ground changes the base choice: compaction and drainage matter more, and a load of fill dirt to raise grade before a #53 base often makes sense.

Within Jackson County, compare the job rather than the county line. A driveway on a wet flat and a driveway on a steep shale slope take the same #53 base but different drainage and slope protection around it.

Order Gravel, Stone and Soil for Jackson County

Indiana Rock Supply delivers bulk gravel, stone, sand, soil and mulch across Jackson County, from Seymour and Brownstown to Crothersville, Medora, Vallonia, Freetown and Norman. Order #53 stone, drainage stone, sand or topsoil online by the ton and have it dropped where the work is. Match the material to the job and the ground, then use the calculator to set the tonnage.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Jackson County

What is #53 stone and what is it used for in Jackson County?

#53 stone is a dense graded crushed stone with fines. 53. It packs hard under compaction, which is why it is the standard Indiana base. In Jackson County it goes under driveways, parking pads, shed bases and the layer beneath pavers and slabs, and it is the material most crews order first.

How deep should a gravel driveway base be in Jackson County?

Depth follows your ground. On slow-draining flats with a dense fragipan, build a thicker compacted base so the drive stays above perched water, and crown the surface to shed runoff. On firmer, well-drained ground a thinner compacted layer holds up. Freeze-thaw here heaves drives, so compact in lifts rather than dumping one deep layer.

How much gravel do I need for my project?

Measure the area in square feet and multiply by the depth in feet to get cubic feet, then convert to tons using the material's weight per cubic yard. A base layer is figured at a minimum depth of a few inches compacted, and a top dressing is thinner. Round up slightly, since compaction settles the material.