Skip to main content
FREE Delivery!|(812) 721-8126
Crushed Stone, Sand and Gravel in Batesville, IN

Crushed Stone, Sand and Gravel in Batesville, IN

Gravel and aggregate delivery in Batesville, IN runs best from late spring through fall. The flat ground here stays wet through winter and spring, so grading and base work wait for drier weeks. Indiana Rock Supply delivers #53 stone, soil and sand across Ripley County.

Start with the ground. Much of this area has silty, slow-draining soil. Fix the grade and the beds first, then build your base on top.

Materials for Batesville Projects

Most jobs here start with the soil, not the stone. If your yard is heavy clay or thin and rocky, the top layer has to be rebuilt before anything sits on it.

  • Screened topsoil for lawn and bed prep over heavy clay or thin rocky ground.
  • Garden soil for raised beds and planting areas.
  • Fill dirt to raise grade, fill low spots and backfill before a base goes down.
  • Limestone screenings for paver and flagstone bedding under patios and walkways.
  • Shredded mulch for beds and tree rings, holding moisture through hot, humid summers.

Once the soil work is done, the base matters. #53 stone, also called 53 stone or #53 crushed limestone, is the standard Indiana base. It is a dense graded stone with fines. 53, and it packs hard under driveways, parking pads and shed bases.

For sand and stone, match the material to the job:

Ground and Conditions in Batesville

Water drives the material choices here. This part of southeast Indiana was glaciated long before the north, so the till is older, thinner and more weathered. Broad flats and valley lowlands carry silty, slow-draining soils, many with a dense fragipan underneath.

That fragipan layer stops water from draining down. Rain and snowmelt perch on top of it, and the ground stays soft through wet winters and springs. On a driveway, that means the subgrade can pump and rut under a loaded truck.

Soft fragipan ground in Ripley County needs a thicker base and somewhere for water to go. Dig out the soft material, put down a separation layer of clean stone, then compact your #53 stone in lifts. A drainage layer of drain rock or #57 stone gives perched water somewhere to go instead of sitting under the slab.

Steep hillsides shed runoff fast into narrow valleys, and some limestone valley edges have sinkholes. Bare cuts on those slopes wash out quickly, so seed or armor them the same season you open them. Winters here are milder than in northern Indiana, but repeated freeze-thaw still heaves gravel drives and softens clay subgrades. Footing depth is set by the county or city building department, so check locally rather than assuming a northern figure.

Delivery to Batesville and the Surrounding Area

Bulk material arrives by the truckload and is dumped where you need it. Walk the site before the truck shows up and pick a drop spot with clear overhead clearance and firm ground.

Order online and size the load by the ton or the cubic yard. Measure the area, decide your depth, and the calculator converts it to a quantity. A thin layer is a good starting point for a top dressing, and a base goes deeper.

Indiana Rock Supply delivers in Batesville and Ripley County, including Milan, Osgood, Versailles, Sunman and Holton. Soft ground is the main thing that stops a drop, so if your low ground is wet from spring rain, plan the delivery for later in the season.

Order Topsoil, Base and Drainage Stone in Batesville

Batesville projects usually start with soil and grading, then move to base and drainage stone. Indiana Rock Supply handles yards, drives, beds, pads and drainage work across Ripley County. Size your load with the calculator, then place the order online and we will deliver it to your site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Batesville, IN

Can I order material by the ton for delivery in Batesville?

Yes. Bulk material is sold by the ton or by the cubic yard, and you pick the quantity when you order online. Measure your area and your depth, then let the calculator convert it. That keeps the load sized to the job instead of guessed at. If you are unsure between two quantities, size for the deeper lift and compact in stages.

What stone should I use for drainage in Batesville?

Use clean, single-size stone so water moves through the voids instead of sitting in fines. #57 stone is the common pick for French drains and foundation drains. Drain rock works for downspout runs and wet spots on flat ground. For heavy flow or a trench bottom, #4 stone or railroad ballast holds up better. Keep the fabric wrapped tight so silt cannot clog the stone.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.