Gravel, Stone and Soil for Pulaski County, IN
For gravel, stone and aggregate delivery in Pulaski County, IN, Indiana Rock Supply sells bulk material by the ton. The base most jobs here start with is #53 stone, a dense graded crushed limestone with fines that packs hard under drives, pads and slabs.
Pulaski County ground runs from sandy outwash plains and drained former marsh to clay loam till on the ridges between them. That mix decides how deep your base goes and how well water moves.
Materials Delivered in Pulaski County
We stock the sizes Indiana crews ask for by name. Sizes run coarsest to finest, and each one has a job it does well.
#53 stone carries most of the work here. Order it where you need a base that packs hard and stays put.
Above that base, Driveway Gravel surfaces an existing drive or tops a compacted #53 layer. For paths and garden walks, Walkway Gravel gives a finer, walkable surface.
Water is the other half of the list. Drain Rock handles French drains, foundation drains and downspout runs. River Rock covers decorative beds and dry creek beds.
Sand and soil round out an order. Mason Sand serves brick and block work and paver joints. Top Soil rebuilds lawns and beds over heavy clay or thin rocky ground.
Ground Conditions Across Pulaski County
Start with the working season. Low, ditched ground and muck stay soft the longest after late winter and spring rain. Base and driveway work runs best from late spring through fall, and frozen ground stops compaction in winter.
The flat sand plains and the ditched former Kankakee marsh sit on a high water table. Low ground stays wet after rain and snowmelt, while the clay till ridges shed water slowly. On wet or clay ground, plan a drainage layer and build the base deeper than you would on sand.
Winters here bring repeated freeze-thaw that heaves gravel drives on wet or clay ground and softens subgrades when the thaw comes. Frost depth is among the deepest in Indiana, and the local building department sets the figure. That is why compaction and drainage matter more than thickness alone.
Wind moves bare, loose sand on exposed ground. Cover finished work or stabilize it before it blows.
Delivery Across Pulaski County
You order online and we deliver bulk material across the county. Coverage includes Winamac, Francesville, Medaryville, Monterey and Star City, along with the surrounding townships.
Size your load by the ton or by the yard, depending on the material. Measure the area and the depth you want, and let the calculator work out the quantity. A bulk delivery arrives as a dump load placed where you can move it with equipment.
Lead time depends on the material and the season. Order ahead when you are working a tight window in late spring or fall.
Choosing the Right Material
Ground next door is not the same as ground here, and the base choice shifts with it. Marshall County sits in Michiana on northern lakes and moraine country, with rolling till ridges broken by sandy and gravelly outwash and pockets of muck and peat in the low spots. That means more grade change and more soft pockets, so drainage and base depth matter more than they do on flat ground.
Cass and White counties share the central and northeast till plain, a flat to gently rolling plain of dense glacial till with sand and gravel outwash along the larger river valleys. Their ground is similar to ours, so compare typical projects instead: driveway resurfacing and drainage work look much the same across all three.
Match the material to the job. Use #53 stone for a compacted base, #73 stone or driveway stone for topping, clean stone for drainage, and screenings for bedding under pavers.
Order Gravel, Stone and Soil in Pulaski County
Indiana Rock Supply delivers gravel, stone, sand and soil across Pulaski County, from Winamac and Francesville to Medaryville, Monterey and Star City. Tell us your material, your measurements and your timing, and we will put the load together. Order online when you are ready to get your project started.