Skip to main content
FREE Delivery!|(812) 721-8126
#53 Stone, Sand and Gravel Delivery in Miami County, IN

#53 Stone, Sand and Gravel Delivery in Miami County, IN

Indiana Rock Supply handles gravel, stone and aggregate delivery in Miami County, IN, and most jobs here start with #53 stone. The ground tells you why. Miami County sits on dense glacial till, loamy clay that drains slowly and stays soft well into spring. A driveway or parking pad built on that clay needs a base that locks together and sheds water, not a loose pile of clean stone.

#53 stone is the dense graded base Indiana crews specify as compacted aggregate No. 53, and it packs hard once it is watered and rolled. We deliver it by the ton to Peru, Bunker Hill, Converse, Denver, Amboy, Macy, Miami and the surrounding townships.

Materials delivered in Miami County

We stock the sizes Indiana buyers ask for by name. The list below runs from the coarsest material down to the finest, with the jobs each one handles on Miami County ground.

#53 stone earns the most attention because it does the most work. It is a dense graded stone with fines, so the particles bind and the surface stays put instead of rolling under tires. Order it for a new drive, a shed pad, or the base under pavers and a slab. Top it with driveway gravel if you want a smoother wearing surface.

Water is the other half of the job. Drain rock and #57 stone go into French drains, downspout runs and foundation drains where flat ground gives water nowhere to go. For a finer walkable path, use walkway gravel. Beds and borders take river rock, and lawns over heavy clay want screened topsoil before seed.

Ground conditions across Miami County

Miami County is a flat to gently rolling plain of dense glacial till, loamy clay through the middle and heavier clay toward the northeast. Sand and gravel outwash follows the larger river valleys. That mix decides how deep your base goes and how well it drains.

Late winter and spring rain on flat, poorly drained till is the local driver. Water has no easy outlet, which is why so much farmland here relies on tile drainage. On a driveway, the same problem shows up as ruts and soft spots unless the base is thick enough and crowned to shed water.

Erosion shows up two ways. Ditches and stream banks scour after heavy rain on flat ground, and the steeper valley walls along the larger creeks wash and slump. Rip rap at a culvert outlet or along a bank holds that ground in place.

Timing matters as much as material. Base and driveway work runs best from late spring, once saturated clay dries out, through fall. Frozen ground stops compaction through the winter months, and repeated freeze-thaw heaves and ruts gravel drives on wet clay. Frost depth runs about 30 inches in the Indianapolis area, with deeper local requirements possible toward the north, and the local building department sets the figure.

Delivery across Miami County

Order online and we deliver bulk material by the ton to your site. You can size a load by the ton or by the cubic yard, whichever your project numbers are in. If you know the length, width and depth of the area, use the calculator to convert that to tons before you pick a delivery date at checkout.

A bulk delivery is a dump truck load placed where you want it. Point us to a spot that can take the weight and leave room for the bed to raise and pull away. For a driveway, that usually means dropping stone along the edge so you can spread it forward.

We cover Peru, Bunker Hill, Converse, Denver, Amboy, Macy and Miami, along with the rural townships between them. Lead time depends on the material and the season, so it pays to plan base work before the fall rush.

Choosing the right material

Ground changes as you cross county lines, and the right base changes with it. Fulton County to the north sits in northern lakes and moraine country, with rolling moraine ridges, sandy and gravelly outwash plains, and pockets of muck and peat in the low spots. On that ground, drainage stone and a thicker clean layer matter more, because muck and peat hold water and will not carry a load.

Howard County and Grant County share Miami County's ground zone, a flat to gently rolling plain of dense glacial till with loamy clay and outwash along the river valleys. The ground is similar, so the comparison is really about the project. A farm lane in Grant County and a driveway in Peru both want a compacted #53 stone base, while a drainage run in Howard County leans on #57 stone or drain rock.

Pick by what the ground does with water. Slow-draining clay needs a dense graded base and a drainage layer beside it. Sandy outwash along a valley drains faster and may need less stone. Where a slope sheds water toward a ditch, rip rap protects the outlet.

Order #53 stone and aggregate delivery in Miami County

Indiana Rock Supply delivers #53 stone, drainage stone, sand, topsoil and decorative rock across Miami County, from Peru and Bunker Hill to Converse, Denver, Amboy and Macy. Tell us the material, the amount and where you want it dropped, and we will get your load on the way.

Towns we deliver to in Miami County

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Miami County

What is #53 stone and what is it used for in Miami County?

#53 stone is a dense graded crushed limestone with fines, specified locally as compacted aggregate No. 53. In Miami County it is the standard base for driveways, parking pads, shed bases and the layer under pavers and slabs. The fines let it bind and pack hard, so it carries weight on soft clay ground.

How deep should a gravel driveway base be in Miami County?

On the dense glacial clay here, most drives need a thick compacted #53 stone base, and soft or poorly drained spots often take more. Compact in lifts rather than one thick layer, and crown the surface so spring rain runs off instead of soaking in.

How much gravel do I need for my project?

Measure the length, width and depth of the area, then use the calculator to get cubic yards and tons. A deeper base adds volume quickly, so figure the compacted depth you want first. Put your numbers into the calculator to size the load, then pick a delivery date at checkout.