Should I order material by the ton or by the yard?

Order base stone and gravel by the ton, since weight is how aggregate is sold and hauled. Order sand, topsoil and mulch by the yard when you are filling a bed or leveling an area. If you are unsure, give the length, width and depth of the area and order the unit that fits the job.

Which stone is best for drainage in Washington County?

Clean single-size stone is the drainage choice, and #8 stone and #57 stone are the common picks for underdrains, French drains and pipe bedding. On the karst plain, where water drains into sinkholes, keep fill and runoff away from sinkholes. Use drain rock for downspout runs and wet spots on flat ground.

What do I need to have ready for a bulk delivery?

Have the drop spot clear and reachable by a dump truck, with overhead wires and low branches out of the way. Mark anything you do not want driven over, and point out the exact pile location when you order. If the ground is soft from rain, tell us so the driver can plan the approach.

Washington County Landscape Rock and Gravel, IN

Indiana Rock Supply sells gravel, stone and aggregate delivery in Washington County, IN, and #53 stone leads the list. That is the dense graded base most drives, pads and shed floors get built on here. Soils in this county are thin and silty over rock on the ridges, with red-brown clay over limestone on the karst plain, so the base does the heavy lifting.

Materials Delivered in Washington County

#53 stone is the standard Indiana base. Local crews say 53 stone or #53 crushed limestone. It has fines that pack hard under a plate compactor or a roller. Order it for driveways, parking pads, shed bases and the base under pavers and slabs.

Other sizes and blends round out the list. #8 stone is a clean single-size stone for underdrains and pipe bedding, and it is a common Indiana driveway topping. Natural Pea Gravel, mason sand and screened topsoil cover walkways, mortar work and lawn prep. River rock and large river rock handle dry creek beds and decorative borders.

Ground Conditions Across Washington County

Start with the failure a thin base shows here. Rain runs off steep slopes fast and collects in narrow valleys, and many ridgetop silty soils have a dense fragipan that holds water near the surface. A drive built on too little base ruts, pumps and breaks up at the edges.

On Washington County clay and steep ground, a drive lasts with enough depth and a way for water to get out. Build up a compacted #53 stone base to the depth the load calls for, then add a clean stone drainage layer where water sits. On the karst plain, water drains into sinkholes, so runoff aimed at a sinkhole can wash out fill or open a collapse. Keep fill and runoff away from them.

Erosion follows the same pattern. Bare steep slopes gully quickly, and shale-rich slopes in the Crawford Upland are prone to landslides, so armor ditches and culvert outlets with rip rap. Base and driveway work runs best from late spring through fall. In wet winter and spring weather clay turns slick and steep, and unpaved drives rut and wash out.

Winters are milder than in northern Indiana but still bring repeated freeze-thaw that heaves gravel drives and softens clay subgrades. Frost depth here is shallower than up north, and the exact footing depth is set by the county or city building department. Do not assume a northern figure.

Delivery Across Washington County

Order online and pick your material, then choose tons or yards. Tons measure by weight and yards measure by volume, and the same stone weighs differently depending on moisture and gradation. Most buyers order base and surfacing stone by the ton and sand or topsoil by the yard.

To estimate quantity, measure the length and width of the area in feet, decide the depth in inches, and convert that to tons or yards. A load sized this way lands close to what the job needs, so you are not short mid-project or left with a pile you cannot use.

Bulk delivery drops the material where your truck can reach, and you show the driver the spot when you place the order. We deliver to Salem, Campbellsburg, Hardinsburg, Fredericksburg and Pekin, plus the surrounding county roads. Clear overhead wires and low branches before the truck arrives.

Choosing the Right Material

Ground next door shifts the choice. Clark County sits in Southern Indiana and spans the Southeast flats, lowlands and Ohio River hills along with South-central hills and karst country, so it shares Washington County's karst ground. There the base call is the same: compacted #53 stone, with clean stone drainage where water stands. The lower, flatter parts of Clark County also drain slow, so the drainage layer matters more than on a ridgetop.

Jackson County also spans the Southeast flats, lowlands and Ohio River hills and South-central hills and karst country. The ground is similar to Washington County, so the comparison is about projects rather than material. A long gravel drive on a hill here still wants a #53 base topped with #73 stone or driveway stone, the same as on your side of the line.

Scott County falls in the Southeast flats, lowlands and Ohio River hills, ground that was glaciated long before the north. That till is older, thinner and more weathered. Broad flat uplands and valley lowlands carry silty, slow-draining soils, many with a dense fragipan, while steep hills along the Ohio and Whitewater rivers have thin clayey soils over shale and limestone. Slow-draining ground there calls for a deeper clean stone drainage layer under the driving surface than a Washington County ridgetop needs.

Get Your Washington County Order Sized Right

Use the calculator to turn your length, width and depth into tons or yards, so your load matches the job. Then pick your material, choose the unit and place the order online for delivery to your driveway, pad or job site in Washington County. Indiana Rock Supply is ready to send it.

#53 Stone, Sand and Gravel Delivery in Washington County, IN